P

3821 Clay Ave SW  Wyoming, Mi  49548 

Contact Kmac Plastics

Domestic Selling Policy

Privacy

Metal Steel Sheets, Rods, Tubes, Bars

Threaded Rods

Dowel Pins

Lag Screws

Self Drilling Screws

Drill Bits

Taper Pins

Set Screws

Sheet Metal Screws

Machine Screws

Felt Discs, Strips, Sheets

HDPE (High Density Polyethylene) Typical Properties

Physical Properties	English
Density	0.0338 - 0.0348 lb/in³	0.948 g/cc
Apparent Bulk Density	0.021 - 0.022 lb/in³	0.59 g/cc
Water Absorption	0.01 %
Moisture Vapor Transmission	0.965 cc-mil/100 in²-24hr-atm
Environmental Stress Crack Resistance	10 - 5000 hour	1600 hr
Mechanical Properties
Hardness, Shore D	58 - 65	62
Tensile Strength, Ultimate	3480 - 6530 psi	30 MPa
Tensile Strength, Yield	2180 - 4350 psi	21.9 MPa
Elongation at Break	500 - 1000 %	840%
Tensile Modulus	116 - 144 ksi	0.86 GPa
Flexural Modulus	72.5 - 220 ksi	0.928 GPa
Izod Impact, Notched	1.5 - 14.1 ft-lb/in	3.7 J/cm
Tensile Impact Strength	152 - 228 ft-lb/in²	380 kJ/m²
Coefficient of Friction	0.28
Electrical Properties
Electrical Resistivity	1e+017 ohm-cm
Surface Resistance	1e+017 ohm
Dielectric Constant	2.3
Dissipation Factor	0.0001 - 0.0005	0.0003
Thermal Properties
CTE, linear 20°C	77.8 µin/in-°F
Melting Point	255 - 268 °F	130°C
Vicat Softening Point	226 - 264 °F	120°C
Brittleness Temperature	-148 - -94 °F	-86.2°C

Hoses

Square Watermelon Growing Cases

Acrylic Colored Pig Pipes

Tube Caps & Plugs

Tape

Balls

Springs

Eyebolts

Carriage Bolts

Spring Pins

Wood Screws

Tapping Screws